What will cause biomass fuel boiler pipe leakage

Biomass fuel boiler pipe leakage will lead to water lower than normal water level and combustion cannot be maintained, which influence safety running. finding the reasons of biomass fuel boiler pipe leakage is necessary to avoid leakage happen.

Oxygen corrosion

For the biomass fuel boiler pressure parts,the water side is mainly electrochemical corrosion,the fire side (or flue gas side) is mainly chemical corrosion.The oxygen corrosion belongs to electrochemical corrosion, it is mainly caused by the dissolved oxygen in water.At room temperature,the dissolved oxygen concentration is about 9.1mg / L,according to the GB1576-2001 “industrial boiler water quality” requirement ,the rated steam pressure should not be more than 1.0MPa,the dissolved oxygen concentration should not be more than 0.1mg / L,otherwise,it is likely to lead to metal corrosion.

Chlorine Corrosion

The chlorine ion exchange will cause high rate of metal corrosion,which is due to that the chloride ion radius is small,and it is typically activated anion,it is more active when the oxygen exists.With the operation of the boiler,if the boiler water salinity increases,the concentration of chloride ions rise constantly,there will be more deposits at the bottom of the boiler,in smoke pipe and the water cycle weak areas.

These are the introduction about biomass fuel boiler pipe leakage reasons, Romiter biomass fuel boiler adopts the water-cooled arched structure,which both increases the rigidity and stability of the furnace arch and extends the service life of the furnace arch,pleasure feel free to contact us for more details!